CabKing 8V1, Инструкция по эксплуатации

Страница: 18 / 20

18
TROUBLESHOOTING
PROBLEM RECOMMENDED SOLUTION
PARTS ARE MISSING OR DAMAGED
CONTACT US DIRECTLY BY CALLING (630) 366 - 6129 OR SEND US AN
EMAIL AT INFO@CABKING.COM.
MOTOR IS HOT
THIS IS NORMAL. BY DESIGN, THE MOTOR IS TOTALLY ENCLOSED AND
NON
- VENTILATED SO IT PRODUCES HIGH TEMPERATURES. THE
TEMPERATURE RANGE IS 190°F - 220°F. AVOID CONTACT WITH THE
HOUSING.
MOTOR MAKES A RATTLING SOUND
THIS NOISE CAN BE COMMON AND WILL EVENTUALLY WORK ITSELF
OUT WITH PROLONGED MACHINE USAGE. IT IS NOT A SERIOUS
PROBLEM UNLESS THERE IS A VIBRATION ASSOCIATED WITH IT.
MOTOR VIBRATES OR SHAKES
MAKE SURE THE WHEELS ARE PROPERLY BALANCED. THIS CAN BE
FIXED BY TAKING THE WHEELS OFF OF THE SHAFT AND REALIGNING
THEM. MAKE SURE THE SHAFTS ARE TIGHTENED.
WATER CONTROL KNOBS
KEEP SPINNING
TIGHTEN THE SET SCREW LOCATED INSIDE THE KNOBS USING A FLAT
HEAD SCREWDRIVER.
WHEELS DON'T TURN
MAKE SURE POWER IS CONNECTED AND MACHINE IS TURNED ON.
MAKE SURE THE WHEELS ARE NOT OBSTRUCTED. IF THE WHEELS ARE
CAUGHT ON SOMETHING BEFORE YOU TURN ON THE MOTOR, THERE
WILL NOT BE ENOUGH MOMENTUM TO START SPINNING.
WATER FLOW IS WEAK OR
DOESN ’ T FLOW AT ALL
MAKE SURE THERE IS ENOUGH WATER IN THE BUCKET WITH THE
WATER PUMP.
MAKE SURE THE WATER PUMP IS CONNECTED TO A POWER SUPPLY.
MAKE SURE ALL WATER TUBES ARE CONNECTED PROPERLY.
CLEAN NOZZLES AND Y - SPLITS WITH THE INCLUDED PIPE CLEANER.
DRIP PANS DO NOT DRAIN
SHAKE THE DRIP PAN TUBES TO START THE FLOW WHILE TILTING THE
DRIP PANS UPWARDS.
MAKE SURE THE DRIP PAN TUBES ARE ANGLED DOWNWARDS. TUBES
SHOULD ALSO BE CUT TO LENGTH AFTER SETTING UP THE UNIT.
CLEAN THE DRIP PAN OUTSPOUT.
NOZZLE / WATER SYSTEM PARTS
ARE LOOSE OR FALL OFF
WE SUGGEST USING TEFLON TAPE AND WRAPPING THE PORTION OF
THE NOZZLE THAT IS INSERTED INTO THE Y
- SPLIT WITH ENOUGH TAPE
TO SECURE THE FIT.