CabKing 8V1, Инструкция по эксплуатации

Страница: 12 / 20

12
The CabKing - 8V1 is configured with two electroplated diamond wheels, four resin
diamond wheels, one diamond disc and one canvas polishing pad. The direct drive
motor on the CabKing - 8V1 eliminates belts and other exterior motor parts to maintain or
replace. The water system is unique and allows you to independently control the water
spray on the wheels. Always use adequate water while in use to avoid running the
wheels dry. If the wheels become covered with stone residue, increase the water flow.
We recommend wearing the included apron to keep you from getting wet while you
work.
Another advantage to our water system is that you can adjust the
spray direction on each wheel. This allows you to use wheels of
different widths. Do this by locating the y - split, which is located
under the hood. Adjust the two nozzles that are inserted into the y -
split by twisting to the left or right (FIG. K).
The CabKing - 8V1 grinds and polishes all kinds of shapes and design of rock, glass,
synthetic material and metal. The most popular use is making cabochons. The general
process of making a cabochon on the CabKing - 8V1 is described on pages 13 and 14.
For more methods and special techniques on how to cut cabochons, read the “How to
use Diamond Abrasives to cut Gemstones” book that is included with this instruction
manual.
MACHINE USAGE
80# 220# 280# 600# 1200# 3000#
PRE-POLISHING
COARSE GRINDING
FIG. K