Cabela's 551306, Руководство пользователя

Страница: 25 / 33

24
OPERATION OF SPIGOT POT
(MODEL 6611BSP AND CAB6610SSP ONLY)
READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
ALWAYS ALLOW COOKING LIQUID TO COOL BEFORE OPERATING VALVE (BELOW
100°F (38°C)). COOKING LIQUID CAN REMAIN DANGEROUSLY HOT HOURS AFTER USE.
ALWAYS USE A THERMOMETER TO CHECK TEMPERATURE OF THE COOKING LIQUID
BEFORE OPERATING THE SPIGOT.
IMPORTANT: If the spigot on your pot is loose or liquid leaks from the spigot pot connection, it
is possible that the connection has loosened in shipment. Allow the liquid to cool completely and
empty from the pot. Tighten the connection using an 8mm hex wrench. Place the hex wrench into
the hex nut on the inside of the pot. Hold the spigot with your hand on the outside of the pot. Turn
the hex wrench clockwise to tighten the connection. If the spigot pot connection continues to leak,
please contact Metal Fusion, Inc. at (800) 783-3885 between the hours of 7:30am-3:30pm (CST)
Monday through Friday.
OPERATING INSTRUCTIONS FOR SPIGOT POT:
1. Before adding cooking liquid, turn valve clockwise until it stops. This is the OFF/CLOSED
position. Also make sure that the removable cap is attached and tight at the base of the
spigot.
2. NEVER open the valve during use or before the oil has cooled below 100°F
(38°C).
3. Upon completion of cooking, allow cooking liquid to cool before operating the valve (below
100°F (38°C)).
4. To operate valve, remove the cap at the base of the spigot. To open spigot, turn
counterclockwise to the ON/OPEN position.
5. Clean the pot as per instructions on pg 20.
6. Always close the spigot valve after cleaning and attach the cap back to the end of the spigot.
* Pot may vary from picture
Valve
Spigot
Removable Cap
For Outdoor Use Only!
FAILURE TO FOLLOW THESE INSTRUCTIONS AND WARNINGS COULD RESULT IN FIRE,
EXPLOSION, BURN HAZARD OR CARBON MONOXIDE POISONING WHICH COULD CAUSE
PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.