Customer Care Australia P: 133 122 F: 1300 303 310 E: [email protected] W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: [email protected] W: cabac.co.nz
3
1.3
SYMBOLS
Important safety information, refer to the operating manual.
Double insulation
（
Protection class
ΙΙ
）
CAT
ΙΙΙ
Overvoltage (Installation) category III, Pollution Degree 2 per IEC1010
-
1 refers to the level of
Impulse Withstand Voltage protection provided.
Conforms to European union directive
Earth ground
AC
Alternating current
DC
Direct current
AC or DC (alternating current or direct
current)
Diode
Continuity buzzer
M.H
The maximum value is being held.
D
-
H
This indicates that the display data is being held.
AUTO
Auto range
The battery is not sufficient for proper operation.
1.4
MAINTENANCE
1.4.1 Please do not attempt to adjust or repair the meter by removing the rear case while voltage is being applied.
A technician who fully understands danger involved should only carry out such actions.
1.4.2
Before opening the battery cover or case of the meter, always disconnect the tip of meter and the probe of the test lead
(or test clip) from all tested circuits.
1.4.3
To avoid the wrong reading causing electricity attack, when the meter displays“
”, you must change the battery.
1.4.4
Do not use abrasives or solvents on the meter, use a damp cloth and mild detergent only.
1.4.5
Always set the transform switch to the OFF position when the meter is not in use.
1.4.6
If the meter is to be stored for a long period of time, the batteries should be removed to prevent damage to the unit.
2. DESCRIPTION
-
This meter is a portable professional measuring instrument with handsome LCD easily reading.
-
Single operation of a transform switch makes measurement convenient. Overload protection and low battery indication
are provided, this meter is ideal for use in the fields, workshop, school, hobby
and home applications.
-
This meter has function of auto range and manual range.
-
This meter has function of auto power off.
-
This meter is with the functions of data hold and
maximum value
measure
and hold.
-
When using, it can show ranges engineering unit enunciators measuring results.
2.1
NAMES OF COMPONENTS
1
Probe
2
Rotatable Probe Socket
3
LED Indicator
4
Protection Ring
5
Transform Switch
6
DATA
-
H
Button
7
RANGE
Button
8
MAX.H
Button
9
FUNC
. Button
10 Panel
11 LCD Display
12
COM
Jack
