OPERATIONS MANUAL MSS-KREC-54AC
Customer Care Australia P: 133 122 F: 1300 303 310 E: [email protected] W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: [email protected] W: cabac.co.nz
10
In support of our policy of continuous product improvement we reserve the right to change materials and specifications without notice. Drawings, where used, are
not to scale. All dimensions are in millimetres and sizes given are approximate. Where possible, technical MSDS data sheets are made available on the website. All
products should be installed and used in accordance with manufacturer’s instructions provided. Warning: products may be the subject of registered designs and
patents. Refer to website for terms and conditions on warranty.
This product is warrantied against defects in materials
and workmanship for one year.
This warranty is subject to the following exclusions and limitations:
1. This warranty does not cover damages to products which are
not installed, operated, used and maintained in accordance with
written instructions.
2. This warranty does not cover products that have been worn out,
damaged by improper storage, damaged or otherwise altered, or
from disassembly or attempted disassembly by parties other than
CABAC or its authorized service representatives.
3. This warranty does not cover damages caused by the use of
components not manufactured or authorized by CABAC, acts of
God, accidents, or use in a manner for which they are not
intended.
Receipt and warranty card are required for warranty services.
If the tool is found to be defective, in our sole judgement, CABAC
will either repair or replace the defective product or part.
Warranty
