Customer Care Australia P: 133 122 F: 1300 303 310 E: [email protected] W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: [email protected] W: cabac.co.nz
3
S-CLICK WALL TIMER MANUAL
2013 July 10th, Revision 1.3
5.2. EXAMPLE TIME SETTING (SHORT)
A desired run time after the button is pushed is 5 minutes and 30 seconds. As the long
range will only allow time settings in 4 minute increments, the closest achievable time is
either 4 or 8 minutes. As this is not suitable, the short range must be chosen.
To set this time, begin with all eight switches in the off (down) position. Switch 8 must
remain off to select the short range. Switch six will set the timer longer than the desired
time, so it remains in the off position. Turn on (up) switch five (4 minutes) leaving a
remainder of 1 minute 30 seconds (5:30 - 4:00 = 1:30). Switch four would add 2 minutes,
which is too much - leave it off. Turn on switch three (1 minute) leaving a remainder of
30 seconds. Turn on switch two (30 seconds), giving a total of 4:00 + 1:00 + 0:30 = 5:30
minutes. This gives the desired time, so switch one may remain off.
Switch seven may now be set for the desired button action - refer section 5.4.
1
2
3
4
5
6
7
8
4min
8min
16min 32min 64min
ON
OFF
128min
15sec
30sec
1min
2min
4min
8min
LONG:
SHORT:
SHORT
OFF
Range
LONG
ON
Timer
Restart
“Example Timer Setting (Short)” diagram
5.3. EXAMPLE TIME SETTING (LONG)
A desired run time after the button is pushed is 36 minutes. Short range will only allow a
maximum setting of 15 minutes and 45 seconds. As this is not suitable, we must choose
the long range.
To set this time, begin with all eight switches in the off (down) position. Set switch 8 on
(up) to select the long range. Switches five and six will both set the timer longer than
the desired time, so they remain in the off position. Turn on (up) switch four (32 minutes)
leaving a remainder of 4 minutes (36 - 32 = 4). Switches three and two would each
add too much time - leave them off. Turn on switch one (4 minutes), giving a total of
32 + 4 = 36 minutes. This gives the desired time.
Switch seven may now be set for the desired button action - refer section 5.4.
1
2
3
4
5
6
7
8
ON
OFF
4min
8min
16min 32min 64min 128min
15sec
30sec
1min
2min
4min
8min
LONG:
SHORT:
SHORT
OFF
Range
LONG
ON
Timer
Restart
“Example Timer Setting (Long)” diagram
