Customer Care Australia P: 133 122 F: 1300 303 310 E: [email protected] W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: [email protected] W: cabac.co.nz
2
S-CLICK WALL TIMER MANUAL
2013 July 10th, Revision 1.3
1
2
3
4
5
6
7
8
4min
8min
16min 32min 64min
ON
OFF
128min
15sec
30sec
1min
2min
4min
8min
LONG:
SHORT:
Timer
Range
Time Intervals
Push
Button
Action
Range
LONG
ON
OFF
SHORT
Timer
Restart
4. OPERATION
When the unit is first connected, or when power resumes after an outage, the unit will
remain off for the first minute, and may not respond to the push button.
To turn on the load and start the timer, push the push-button. The timer will run for the
period set by the DIP switches (see section 5). The indicator light will also turn on, to
indicate that power is applied to the load.
Pushing the push-button when the load is on will either turn the load off or restart the
timer, depending on the configuration of the Button Action DIP switch (see section 5.4).
The
HNS210TD
can also be operated from a remote switch. The remote switch will act in
exactly the same way as the switch on the unit.
5. SETTING THE TIMER
Electrical Safety Warning: Isolate the HNS210TD from the mains power supply
before setting the timer.
5.1. DIP SWITCH OPERATION
The eight DIP switches are visible through a window in the internal enclosure of the
electronic module. The first six switches set the time period for which the HNS210TD will
apply power to the load. The seventh switch sets the action of the push button during
the timer countdown - either to turn the load off, or restart the timer period. The eighth
switch sets the range to either short time settings (15 second increments) or long time
settings (4 minute increments).
“DIP Switch Operation” diagram
