CAB SQUIX Series, Руководство по настройке

Страница: 10 / 64

10 10
2.5 Connecting Label Printer via USB Interface
The full-speed USB interface allows the label printer to be operated via a USB interface of a computer running one of
the 32bit or 64bit operating systems:
• Windows Vista • Windows 8.1 • Windows Server 2008 • Windows Server 2012
• Windows 7 • Windows 10 • Windows Server 2008 R2 • Windows Server 2012 R2.
• Windows 8 • Windows Server 2016
A printer driver must be installed if a USB interface will be used for connection. The printer driver for your unit is found
on the "Installer DVD" which is included in the scope of delivery or on the internet.
1. Switch label printer off..
2. Connect computer and label printer with an A-B cable.
3. Switch computer on.
4. Place the "Installer DVD" in the DVD drive.
5. Exit all programs currently running.
6. Switch printer on.
The Windows Installation Wizard is started automatically.
7. Follow the on-screen instructions. After successful installation, an icon for the label printer appears in the
Windows "Printer" system folder.
8. Click icon in "Printer" system folder and make printer settings if necessary.
2.6 Connecting Label Printer via RS-232 interface
Pin Designation Function
1 CD Carrier Detect
2 TxD Transmit Data
3 RxD Receive Data
4 DTR Data Terminal Ready (not used)
5 GND Ground
6 DSR Data Set Ready (not used)
7 RTS Request to Send
8 CTS Clear to Send
9 RI Ring Indication (not used)
Table 1 Pin assignment of the RS-232 interface

Connect the 9-pin socket to the matching port of the computer.
For the most computers a 9pin serial SUB-D cable with 1:1 wiring can be used.

Install the Windows Printer Driver from the DVD included in the delivery contents of the printer.

Configure the interface parameters of the interface matching to the settings of the computer.

page 25.
2.7 Setting Up a Bluetooth Connection
To set up a Bluetooth connection a Bluetooth USB Adapter (Part No. 5977732) is required.
i
Notice!
A Bluetooth software is delivered with the Bluetooth USB Adapter.
1. Connect the Bluetooth USB adapter an to an USB host interface.
2. Switch on the printer.
3. Install the Bluetooth software on the computer.
4. Start the Bluetooth software.
5. Start "Search devices".
The printer will be shown in a list of Bluetooth devices.
6.
Optional : For an well-defined connection of the devices select the printer and click "Connect Devices".
Either a passkey will be shown or a window will be opened where a passkey can be set.

Set a passkey if
necessary .
The display of the printer shows a prompt to enter the passkey too.

Enter the passkey.
7. Select in the software "Connecting" via "Serial Bluetooth Interface".
The new interface, e.g COM5, will be shown
8. Install the current printer with connection via the new COM interface in the label software or in Windows.
2 Connecting Label Printer to Computer