18
18
5.2 Lubricating the Blades
i
Note!
When cutting through the label material instead of the label gap
remains of adhesive may accumulate on the blades. If operating in
backfeed mode, such remains of adhesive may be deposited on the
drive roller as well.
Clean often the drive roller (
Printer Instructions) and the
cutter blades.
For a perfect function of the cutter, it is necessary to grease the blades and
guides at selected areas after each cleaning and before installing new blades.
Lubricate the marked areas at the front side (1) of the upper blade and the
rear side (2) of the lower blade as well as the guides (3).
!
Attention!
Use only such a grease to lubricate the blades and the guiding
surfaces which is suitable for metal and plastics.
cab Part No.: 5984552.001
1
2
1
2
3
3
3
3
