manualshive.com logo in svg

CAB Hermes Series, Техническая информация

Поделиться
Скачать
CAB Hermes Series Скачать руководство пользователя страница 57

cab - Produkttechnik GmbH

A-1

Appendix A - Built-in Dimensions

The devices of the Hermes-family are prepared to build in an assembling line.
For that reason there will be offered a fitting clamp for the hanging mounting
and in the other case feet for a standing mounting.

Of course you are able to order Hermes without any options and use own fitting
elements.

Certainly by ordering the option clamp the fitting holes for the mounting of the
warning light (option), a compressed air service unit for the pneumatic
applicator and  standard mounting elements (e.g. flange FKV 50 respectively
profile EV 50 of the firm Rose&Krieger Verbindungstechnik GmbH) will be
delivered.

The feet of Hermes are shaped in such a way that the printer may be fitted at
the setting area with suitable clamps and so the Hermes will be saved against
sliding.

CAUTION !
If you have purchased the printer without  feet, avoid to place it upright.
Due to the missing feet, the printer may fall on its front side, where its
own weight rests on the print mechanism. This may cause damage to the
printer.

The drawings at the next pages show the most important function dimensions
to integrate the Hermes :

Page A-2 :

Hermes 4N

Page A-3 :

Hermes 4F

Page A-4 :

Hermes 5N

Page A-5 :

Hermes 5F

Содержание Hermes Series








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды