CAB EOS, Руководство оператора

Страница: 23 / 36

22 23 23 7 Maintenance
7.1 Cleaning Instructions
Danger!
Risk of death from electric shock!

Disconnect the printer from the power supply before performing
any maintenance work.
It is important to clean the thermal printhead regularly. This guarantees a
consistently good printed image and reduces wear of the printhead.
Otherwise, the maintenance is limited to monthly cleaning of the device.
!
Attention!
The printer can be damaged by aggressive cleansers.

Do not use abrasive cleaners or solvents for cleaning the
external surfaces or modules.

Remove dust and paper fluff from the print area with a soft brush or
vacuum cleaner.

The cover of the printer can be cleaned with a standard cleanser.
7.2 Cleaning the Printhead
Cleaning intervals:
direct thermal printing
- every media roll change
thermal transfer printing - every ribbon roll change
Substances may accumulate on the printhead during printing and adversely
affect printing.
!
Attention!
Printhead can be damaged!

Do not use sharp or hard objects to clean the printhead.

Do not touch protective glass layer of the printhead.
!
Attention!
Risk of injury from the hot printhead line.

Ensure that the printhead has cooled down before starting
cleaning.