CAB AXON 2 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 28

CAB AXON 2 Скачать руководство пользователя страница 27

27

10 Licenses

cab Produkttechnik
GmbH & Co KG
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Germany

EU Declaration of Conformity

We hereby declare that the following device, due to its design, construction and the version placed on the market by us,
complies with all applicable health and safety requirements of the relevant EC directives. In the event of unauthorized

modification of the device or its intended purpose, this declaration will no longer be valid.

Device:

Labelling System

Type:

AXON 2 (24 - 60 V DC)

Applied EU Directives

Applied Standards

Directive 2006/42/EC on machinery

•

EN ISO 12100:2010

•

EN ISO 13857:2008

•

EN 349:1993+A1:2008

Directive 2014/30/EU relating to electromagnetic compatibility

•

EN 55032:2012

•

EN 55011:2016 +A1:2017

•

EN 61326-1:2013

•

EN 61326-2-6:2013

•

EN 61000-6-2:2005

Directive 2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment

•

EN 50581:2012

Commission delegated directive (EU) 2015/863 amending Annex II to
Directive 2011/65/EU of the European Parliament and of the Council as
regards the list of restricted substances

Authorized representative for technical documentation:

Erwin Fascher
Am Unterwege 18/20
99610 Sömmerda

Signed for, and on behalf of the Manufacturer :

cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda

Sömmerda, 14.09.2019

Erwin Fascher
Managing Director

10.2

FCC

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. The equipment
generates, uses, and can radiate radio frequency and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user may be required to correct the
interference at his own expense.

«
...
25
26
27
28
»

Содержание AXON 2





























Отзывы:

Нет отзывов