CA RING TOSS, Стандартное рабочее руководство

Страница: 18 / 46

Coastal Amusements Inc. | Ring Toss
18
4. Be sure that the black outline around the first and last bottle in the odd rows are
approximately surrounding the actual bottles in the image (as shown in photo above).
5. All of the bottles should be within the red box outline (as shown in the photo above).
6. The bottom edge of the red box should be in the black area between the tray and the
hopper (as shown in the photo above).
7. The green box on the bottom should be totally within the reflective tape that is used to
observe the foul line (as shown in photo above).
If the image does not look correctly aligned, do the following:
1. Loosen the camera mount and adjust the camera so that it is correctly aligned.
2. There are two nuts in the rear of the camera mount that can be loosened to allow the
camera to move left and right. See the following photo (green arrows are pointing to
the nuts):
3. Once you have the camera aligned left-to-right and have tightened the nuts back up,
you can loosen the screws on the sides of the camera mount to adjust the angle of the
camera (green arrows are pointing to the screws):