C-Tech HTHY-8159, Руководство по эксплуатации продукта

Страница: 46 / 74

- 44 -

SHB-IIIA: Ejector and suction nozzle are made of stainless steel (ANSI standard), others are the
same as SHB-III.

SHB-IIIS: The pump body is made of PP material, which is more suitable for acid gas, and the
others are the same as SHB-III.

SHB-IIIT: Transparent water tank, easy to observe water level and water quality, others are the
same as SHB-IIIA.

SHB-IIIG: Using the latest technology, it has longer life, better anti-corrosion performance and
reliability; the basic material is the same as SHB-IIIA; the ejector and suction nozzle are sprayed
with Teflon (PTFE), and the gas pipeline is made of fluorine rubber.
III. Technical specifications
Vacuum degree 0.098 Mpa (20 mbar) (1 atm, circulating water temperature of 6~25
℃
)
Single air extraction rate 10L/min
Flow rate 80L/min
Water tank volume 15L
Motor power 180W
Working voltage ~220 V±10% 50HZ
Noise ＜ 50dB
Dimensions
385 × 285 × 420mm
Weight 15kg
IV. Operation
1. Preparations. Place the machine flat on the workbench. When using for the first time, open the
upper cover of the water tank and inject clean cold water (water can also be added through the
drain hose). Stop adding water when the water surface reaches the height below the overflow
spout at the back of the water tank. There is no need to add water when starting the instrument
repeatedly. Change the water at least once a week. If the water quality is seriously polluted and
the usage rate is high, the water change cycle must be shortened to keep the water in the water