CAST XFP ANALOGUE ADDRESSABLE FIRE ALARM PANEL
Commissioning/Programming Quick Start Guide
Approved Document No. DFU5020010 Rev 4
Page 3 of 16
Contents
1
Commissioning/Programming Overview ...................................................................... 4
2
Pre-Commissioning Checks at the Panel ..................................................................... 4
3
Commissioning the Panel .............................................................................................. 5
3.1
Auto Address ...................................................................................................................... 5
3.2
Loop Learn .......................................................................................................................... 7
4
Programming the Panel ................................................................................................. 9
4.1
Install the XFP Programming Tools ..................................................................................... 9
4.2
Connect PC Laptop to Panel ................................................................................................ 9
4.3
Set Up the Panel .................................................................................................................. 9
4.4
Load Data from the Panel to the PC Laptop ........................................................................ 9
4.5
Name Loop Devices ...........................................................................................................10
4.6
Name Zones and Assign Devices to Zones/Groups/Sets ..................................................11
4.7
Edit Group Configuration ....................................................................................................14
4.8
Enter Site Details ................................................................................................................15
4.9
Save Data from the PC Laptop to the Panel ......................................................................16
E&OE. No responsibility can be accepted by the manufacturer or distributors of this range of fire panels for any misinterpretation
of an instruction or guidance note or
for the compliance of the system as a whole. The manufacturer’s policy is one of continuous
improvement and we reserve the right to make changes to product specifications at our discretion and without prior notice.
Manufacturer: Computionics Limited (C-TEC), Challenge Way, Martland Park, Wigan, Lancashire WN5 0LD.
Niederlassung Deutschland: C-TEC Germany Limited, Virchowstr. 32, D-
