C.T.M. HS-559, Руководство по обслуживанию

Страница: 8 / 14

Service Manual ‐ CTM HS ‐ 559
8
4 ‐ 2 Front frame – Bar Assembly
Tool requirement,
29mm offset wrench
Instruction for disassembly
‐ When changing the parts in this area, pay more attention about this sequence. Should take note the
sequence when disassemble.
‐ Below list is from above
12 526680 ‐ 52800 PADLOCK 1
11 536228 ‐ 56010 NUT , STEERING STEM LOCK 1
10 536212 ‐ 56000 WASHER 1
9 536211 ‐ 56000 WASHER TOOTH 1
8 536213 ‐ 56000 RACE , STEERING OUTER UPPER 1
7 536215 ‐ 56000 BALLS SET. 2
Inspection points
When assembling, please use the torque wrench to make sure the tightening torque as the drawing.