3
5.
Installation
•
Remove back plate from the reader using security driver supplied, and use it (or the template) to
mark the two fixing holes and one cable hole.
•
Secure back plate to the wall using fixing screws provided.
•
Thread cable through the hole and connect wires needed, wrap unused wires with insulating tape
to prevent short circuit.
•
Fit the reader into the back plate and replace retaining screw.
6.
Wiring
Colour
Function
Description
Pink
RESET
Reset
Pink
RESET
Reset
Green
D0
WG output D0
White
D1
WG output D1
Grey
ALARM-
Alarm negative (alarm positive connected to 12/24V+)
Yellow
OPEN
Exit button one end (the other end connected to GND)
Brown
D_IN
Magnetic switch one end (the other end connected to GND)
Red
12/24V +
12/24V + DC regulated power input
Black
GND
12/24V – DC regulated power input
Blue
NO
Relay normally open
Purple
COM
Relay common
Orange
NC
Relay normally closed
