C.P.Bourg Bourg Binder 3001, Руководство оператора

Страница: 9 / 51

1.4 Instructions for safe use
Bourg products have been tested in accordance with the strictest international safety
standards. To help assure safety it is important that you observe the following rules:
Connection:
• Do not move the machine yourself, but contact our Customer Service.
• For equipment connected via a fixed connection to the network. The cable connection to the
interface box should be easily accessible.
• Do not place the machine in rooms which are too small and insufficiently ventilated.
See safety data sheet (in appendix) for information about space and ventilation
requirements.
Note : • If an other type of glue is used of the recommended one (National Coolbind
1300), please refer to the safety data sheet of the used glue.
• Vapours which may be formed at elevated temperature may be irritating to
eyes and respiratory tract. A local exhaust over glue tank and a good
ventilation of the room are required.
• Different fume regeneration/extraction are available following the type of
binder (see spare parts catalog).
Surroundings:
• Do not block the ventilation openings of the machine.
• Ensure that the machine is placed on a level, horizontal surface of sufficient strenght. See
machine specifications for information about the weight of the equipment.
Maintenance:
• Do not remove any screws from fixed panels.
• Do not carry out maintenance activities except for the parts and maintenance materials
mentioned in this manual.
• Do not place any liquids on the machine.
• To avoid the risk of introducing hazards, all modifications to Bourg equipment are
strictly reserved to properly qualified and trained service technicians.
Operator Manual
Page 9 - 9
Initial issue: 12/00
Latest revision: 08/06