C.P.Bourg BDF-e, Руководство оператора

Страница: 54 / 75

Operator Manual
Page 9 - 54
Initial issue: 02/13
Latest revision: -
10.2.7 Manual stitching of a set
It is interesting to be able to correct erroneous books (missing or double).
You can process them by introducing the set by hand into the BDF-e.
If there is no paper under the stitching heads, the stitching command cannot be executed.
You can only process books in compliance with the variables set for this job.
Proceed as follows.
You are in «Run» menu. Open the upper cover of the BDF-e. The BDF-e will be set in waiting
mode. Place the paper set under the stitching heads.
Close the upper cover.
Start the BDF-e. Manual stitch function appears on the screen. Push on the button, the inser-
ted set will be stitched, folded, cut and ejected according to the job description.
You can continue the on-line job.
The BDF-e is ready to continue the on-line job. If more books need to be corrected, repeat the
same operation.