SAND FILTER INSTRUCTION MANUAL
pag. 7 di 8
www.cpa-piscine.it
Rev.01
–
27/04/21
Cleaning the bottom of the pool
The vacuuming of the pool floor is carried out in FILTRATION position of the valve. The floor cleaner must be connected with the
hosepipe to the skim vac of the skimmer. The pump must be switched off.
ATTENZIONE
The hosepipe of the floor cleaner must be completely full of water so the pump does not suck air, when this is done the pump can
be started. If air enters the monobloc, stop the pump and purge the floor cleaner.
Start the pump again slowly (a start-up too quickly will raise the impurities) and brush the pool floor with the floor cleaner brush.
For monobloc without pre-filter, it is better to use a skimmer with a basket and gauze.
Monobloc
’s data
Model
Monobloc [mm]
[m
3
/h]
[CV]
[W]
White Pool 490
Ø
300
4
0,25
184
White Pool 610
Ø
400
6,5
0,5
368
White Pool 730
Ø
400
6,5
0,5
368
White Pool 910
Ø
500
10
0,75
552
