Rev. 2 of 19.12.17
№00410
8 Installation
8.1 Arrange the magnet at the side where built-in magnetic contact is
located, as it is shown in Figure 1.
8.2 It is not recommended to install the Detector on metal surfaces.
In case of installation on metal, use empty case of master element as
an insulating layer between surface and magnet.
8.3 A distance between the Detector or magnet and magnetically
conductive material should not be less than 10 mm.
8.4 At any possible positions of the monitored structure, the Detector
and magnet should not be exposed to any mechanical impacts
(compression, blows, etc.).
9 Storage and Transportation
9.1 The Detectors in original package may be transported by any
transport facility in closed vehicles over any distances in compliance with
the existing shipping rules concerning the respective means of transport.
9.2 After transportation under the conditions different to exploitation
conditions, the Detector shall be ready to operate after a maximum of
six hours.
10 Manufacturer’s Guarantees
10.1 «RIELTA» JSC guarantees conformity of the Detector to it’s
Technical Specifications if conditions of transportation, storage, assembling
and operation are observed. The guaranteed storage period is 63 months
since the date of manufacturing the Detector.
10.2 The guaranteed period of operation is 60 months since the date
of commissioning within the storage period guaranteed.
10.3 For guaranteed maintenance, please contact:
«С.Nord» STCF
Russia, 190020, St. Petersburg,
Obvodny Channel emb., 199-201, build.13, BC «Obvodny Dvor»
Phone: (812) 327-16-36
E-mail: [email protected], [email protected], www.cnord.ru
Note
– Warranty obligations are not applied to power supply battery.
11 Packing Certificate
Wireless magnetic contact security Detector «CN-Magnetic-Mini» has
been manufactured in compliance with the active technical documentation
and classified as fit for operation and packed by «RIELTA» JSC.
Packing date _______________________________
month, year
By order of «С.Nord» STCF, www.cnord.ru
Russia, 190020, St. Petersburg,
Obvodny Channel emb., 199-201, build.13, BC «Obvodny Dvor»,
Phone: (812) 327-16-36, [email protected]
Technical support: [email protected], http://support.cnord.ru
Made in Russia
The Manufacturer: «RIELTA» JSC, www.rielta.com
Russia, 197101, St. Petersburg, Chapaeva str., 17
Phone /fax: +7 (812) 233-03-02, 703-13-60, [email protected]
Technical support: phone +7 (812) 233-29-53, 703-13-57, [email protected]
