C-NaviGator III Mounting Reference Guide
Revision 2
Page 11 of 20
3/29/2018
NaviGator III is at least 80cm (31.5”) from a standard compass; at least
45cm (18”) from a steering compass.
4. When selecting the site of a display unit, the maximum cable lengths have
to be considered.
5. When a product is being installed, the surface base or bulkhead must be
checked to ensure that it is flat in order to avoid twisting of the unit when
the fixing screws are tightened, because such twisting would impair
mechanical functions. Any unevenness should be compensated for by
means of spacing-washers.
6. The grounding screws of the units must be connected to the body of the
ship (ground); the wire used should have a cross sectional area of at least
6 mm
2
(10AWG).
7. Transportation damage, even if apparently insignificant at first glance,
must immediately be examined and be reported to the freight carrier. The
moment of setting-to-work of the equipment is too late, not only for
reporting the damage but also for the supply of replacements.
8. The classification is only valid for approved mounting brackets provided by
C & C Technologies. The unit shall be mounted stand-alone without any
devices or loose parts placed at or nearby the unit. Any other type of
mounting might require test and re-classification.
