C-LOGIC 400-TC, Инструкция по эксплуатации

Страница: 13 / 16

- 13 -
C-LOGIC 400-TC
EN
Connection diagram
NC: Normally close contact
COM: Common terminal
NO: Normally open contact
Installation
1) After open upper panel and bottom panel, fix the bottom panel on the wall
using two screws, entering the required wires through hole of the bottom
panel. It is recommended that the wires have a length of 20 cm in order to
facilitate the connection.
2) Install two AA batteries and connect the wires on input terminals.
3) Finally, close bottom panel and upper panel.