MDVR User's Manual V1.5
32
/
35
4.2. How to get connection with server?
*If device has no Wifi and/or 3G, this part can be ignored.
Step1. Get 3g/wifi ready with antenna and sim cards.
Step2. Turn on DVR, enter into setting, go to “system set – terminal set”, fill in the 3g sim number.
Step3. Back to setting, go to “net set – center set”, change the IP with server IP address (port keep default 6608)
4.3. How to use IO alarm series port?
The device has 12 alarm input, and 2 alarm output. Alarm is triggered by high and low voltage preset for actions
such as “braking, sheering, car igniter, alarm button” etc. For example, when driver pushes the pedal down,
MDVR sensor a high voltage, otherwise low voltage.
Pls note the herein alarm is of ability to accept max.200mA. To connect device of high power, an outer relay is a
must for the connection.
