IP Camera Network Setup Guide
Phone: 800-252-1910
Int: 708-867-4002
7
of
10
Step 3. Modify Network Parameters
1.
In the list of devices discovered, find the device you want to change the network settings for, click the select
box to check it, and then see the
Modify Network Parameters
window. See below.
2.
In the Modify Network Parameters window, edit the correct network parameters, and then enter the
admin
user
password in the field at the bottom.
a. Enable DHCP
: You can select
Enable DHCP
to acquire compatible network settings from a DHCP server
installed on the LAN. However, these settings can be changed by the DHCP server. Since it is
recommended to use a static IP address, you can use DHCP to acquire compatible network settings, and
then uncheck
Enable DHCP
and save that configuration to retain the new network parameters.
b.
In the example below, the IPv4 address was changed to 192.168.3.100, and the IPv4 Gateway was
changed to 192.168.3.1. These settings were determined to be compatible with the network switch and
other devices that share the same network.
3.
Click
Modify
to save your settings.