background image

Preparing to fly             Position 

  Start Flying

DF801

3

(2).  Connect with the APP

Open your mobile phone, navigate to settings and then the 
WLAN:
When flying with the APP, click the network of "Drone-xxxxxx 
(serial number)" to connect the drone to the APP. In this 
situation, the drone has a relatively shorter range.
When flying with the controller, click the network of 
"Controller-xxxxxx (serial number)" to connect the drone 
to the remote controller. In this situation, the drone has a 
relatively longer range.

Open the APP to enter the interface as shown in the left picture. Click "Start Flying" to enter the operation interface as 
below. 

Note:   The aircraft can only connect to 5G Wi-Fi enabled mobile phone.
           Use the APP to monitor the shooting footages and the flight condition in mid-flight.

        It is able to use both of the remote controller and the APP to control the aircraft. However, some functions     

are not support on the APP when the controller being used except these functions, including taking 
photos or videos, follow me mode, point of interest mode or waypoint flying mode.

5). Operate the aircraft

(1).  Take off

 Method 1: take off manually

When aircraft is on standby state,please initiate aircraft as 

below:

Toggle the left and right joysticks outward for at least 3 

seconds (shown as the picture) as to get the propellers 

started to rotate.

Slowly toggle the throttle joystick upward to control the 

aircraft take off quickly, and then toggle again to make it ascend slowly.

 Method 2: one key take off

Long press the 

One Key Takeoff/ Landing

 button for 2 to 3 seconds. When the remote controller beeps steadily, the 

aircraft will automatically take off and ascend to the altitude of 1.2 meters and hover.

(2).  Land

Please be aware of the crowds or obstacles and ensure the aircraft is hovering over the landing site before landing. Choose 

an open and flat space as your landing site.

 Method 1:  land manually

Slowly toggle the throttle joystick to control the aircraft to land. When the drone lands on the ground, continue to toggle the 
joystick towards the lowest position until the propellers stop rotating.

Содержание Dream









Отзывы: