C-Dax pasture meter+, Руководство по эксплуатации

Страница: 24 / 38

17
WARNING
Should the need arise to make a weld repair on the sled, the sensor MUST
be unbolted and COMPLETELY SEPARATED from the sled. The tube
through which the sensor cable is routed must be unscrewed and the
sensor cable disconnected from the indicator console cable at the rear of
the ATV. These components must be carefully put aside while any welding
work is undertaken.
Welding sets up high circulating currents in the steel framework and these
can damage or destroy the sensor electronics. Welding must not be
undertaken on the sensor.
Damage to electronics resulting from welding will void warranty.
Please Note: Welding may distort the frame of the sled making realignment
necessary. If this occurs you will need to contact C-Dax Limited to arrange
repair.