C. Davis Systems
CDS-LC
SYMPTOM
PROBABLE CAUSE
SOLUTION
Loss of air
Check air supply,
hoses, air filter
element, and air
valve. Replace
if needed.
Contact jammed
Wire pushed in crimper
power cycle machine,
in Crimper
before crimper was ready
clear by hand if needed
following all safety
precautions pertaining
to power and air.
Loss of air pressure
Check Air pressure and
lines
Funnel does not
Loss of air
Check air supply hoses
open
and air valve.
Replace, if needed.
Machine rattles
Feeder bowl is set to
Reset bowl gap
real loud when
close to Escapement
according to section
contact is selected
3.1
Contact stuck between
Remove contact from
bowl and Escapement
between bowl and
Escapement. Check
Setting according to
section 3.1
Bowl does not
Bowl vibration is low
Amplitude
move contacts
adjustment may
up to escapement
need to be
adjusted to
factory setting.
Bowl mounting
bolt not tight.
Bowl vibration does
Check power
check power supply
not come on
and Bowl driver
fuse. Fuse is
located in electrical
box on the bowl
controller, #6005.1.
Model #CDS-LC C. Davis Systems Inc. Operations Manual
