C-Data FD1216S, Руководство CLI

Страница: 70 / 115

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
63
Inbound: the traffic on inbound packets of the interface
Outbound
：
the traffic on outbound packets of the interface
rule ‐ id
：
ID the rule ID of ACL
acl ‐ id: ACL
’
s name
port ‐ list
：
ports list
vlanID: Add the outer label
pri ‐ value: The value of the priority
【
Description
】
traffic ‐ priority
: Command is used to configure vlan priority for the specified port, and make it
into effect. When you need to use the ACL rules to change VLAN priority, you can use this
command.
no
traffic ‐ outervlan
: Command is used to cancel ACL specified vlan priority of the specified
port. When you need to delete the specified port’s the vlan priority, you can use this command.
【
Example
】
In the worktime period, the message are specified that the priority of vlan is 1, ip address of the message
is 10.10.10.2
OLT(config)# time ‐ range worktime 8:00 to 18:00 working ‐ day
OLT(config)# acl 2000
OLT(acl ‐ basic ‐ 2000)# rule 2 permit source 10.10.10.2 0.0.0.0 time ‐ range working ‐ day
OLT(acl ‐ basic ‐ 2000)# exit
OLT(config)# traffic-priority inbound 2000 port ge 1 remark-priority 2
12.7
traffic ‐ redirect
【
Command
】
traffic ‐ redirectinbound acl ‐ id [ rule ‐ id rule ‐ id ] port
（
ge | xge
）
port ‐ list to
（
ge | EPON | xge
）
port ‐ list
no traffic ‐ redirectinbound acl ‐ id [ rule ‐ id rule ‐ id ] port
（
ge | xge
）
port ‐ list
【
View
】
Config view
【
Parameter
】
Inbound : the traffic on inbound packets of the interface
Outbound
：
The traffic on outbound packets of the interface
rule ‐ id
：
the rule ID of ACL
acl ‐ id: ACL
’
s name
port ‐ list
：
ports list
【
Description
】
traffic ‐ redirect
: Command is used to configuration ACL redirects for specify port, and make it
into effect. When you need to use the ACL rules to redirect traffic of port, you can use this
command.
no
traffic
-
redirect
: Command is used to cancel ACL traffic mirrorof the specified port. When
you need to delete the ACL traffic mirror function of the specified port,you can use this command.
【
Example
】