C-Data FD1216S, Руководство CLI

Страница: 10 / 115

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
3
1.The command line interface view
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
The switch view and view
instructions
：
This command line environment is divided into multiple views
,including:
View model
，
The following called view or user mode
,
enter it After inputting password,
The model can perform the most simple commands
.the view are as follows: OLT >

Enablemodel
，
The following called
enableview or Privileged model,entering it by inputting
enable commands from viewmodel
，
this model has a higher privilege than view model.the
view are as follows
：
OLT#

Configview,Hereinafter referred to as the config view or global configuration mode,entering
it from enablemodel by inputting conf terminal,the view are as follows:OLT (config)#

Geinterface view
，
Hereinafter referred to as the "view/ge/gigabit interface mode
，
entering it
from configmodel by inputting interface ge
：
the view are as follows:OLT(interface ‐ ge)#

Xgeinterface view
，
Hereinafter referred to as xge/view/Wan Zhao interface mode
,
entering it
from configmodel by inputting interface ge:the view are as follows
：
OLT(interface ‐ xge)#

EPONinterface view,Hereinafter referred to as the view /epon interface mode
，
entering it
from configmodel by epon:the view are as follows:OLT(interface ‐ EPON)#

Vlanif three layer interface view:entering it from configmodel by inputting interface vlanif
vlanID
：
the view are as follows:OLT(interface ‐ vlanif ‐ 20)#

Management interface MGMT view:entering it from configmodel by inputting interface
mgmt:the view are as follows:OLT(interface ‐ mgmt)#

dba ‐ profile model view:entering it from configmodel by inputting dba ‐ profile profile ‐ id id
：
the view are as follows:OLT(dba ‐ profile ‐ 1)#

lineprofile model view:entering it from configmodel by inputting ont ‐ lineprofile profile ‐ id
id
：
the view are as follows:OLT(ont ‐ lineprofile ‐ 1)#

srvprofile model view:entering it from configmodel by inputting ont ‐ srvprofile profile ‐ id
id
：
the view are as follows:OLT(ont ‐ srvprofile ‐ 1)#

multicast ‐ vlan view:entering it from configmodel by inputting multicast ‐ vlan vlanid
：
the view
are as follows:OLT(multicast ‐ vlan ‐ 100)#