10
TROUBLESHOOTING GUIDE
SYMPTOMS
POSSIBLE CAUSES
SOLUTIONS
The LCD display is
faulty when the power
is first turned on.
Static hangup.
Remove all batteries.
Unplug the jack and wait
5 seconds before
plugging the unit in again.
Battery charging starts
before the lid is closed.
Pressing the
DISCHARGE OVER-
RIDE button does not
stop the discharge
cycle.
Pressing and holding
the DISCHARGE
OVERRIDE button for
3 seconds does not
switch to IDS mode.
Defective unit.
Contact your dealer.
Defective unit.
Contact your dealer.
Some of the recharged
batteries have a low
battery life or no output
at all.
Display shows
More than one battery
being recharged at the
same time. Some are
loose or have bad
contact.
Put those batteries back
into the charger and close
the lid to recharge again.
See Revitalizing NiCad
Batteries on page 8.
Bad battery
Properly dispose of the
faulty battery.
Charger is not in Soft-
Start Charging mode.
Press and hold
DISCHARGE OVERRIDE
button for 3 seconds to
switch to IDS mode only
in Soft-Start mode.
Bad battery
Properly dispose of the
faulty battery.
Содержание QuickCharger
Страница 1: ...Operating Instructions...
