C. Crane CC Skywave, Инструкция по эксплуатации

Страница: 14 / 24

CC Skywave Page 14
Radio Operation
seconds to change this setting.
12. Charge Button - Battery Charging
Use the CC Skywave to recharge your NiMH type batteries.
Supply power to the CC Skywave from AC power adapter
(not included). With the radio powered off, press and hold the
CHARGE button for two seconds. The battery icon on
the display will begin to cycle indicating that the batteries are
charging. Charging will continue for 10 hours or until the
batteries are full. Do not charge alkaline batteries.
13. Time Set Button - Setting the Time
With the radio OFF, press and hold the TIME SET button for
two seconds. While the hour is flashing, press the or
tuning buttons (or rotate knob) until the hour and AM/PM time
is correct. Press the TIME SET button again to adjust the
minutes. When finished, press the TIME SET button again.
14. Activate 9 or 10 kHz AM Tuning - Expand FM Band
Many parts of the world, including Europe, use 9 kHz tuning
steps for the AM band. 10 kHz tuning steps for AM are used in
the USA and other regions. Switch tuning steps by holding