C. Crane CC Skywave, Инструкция по эксплуатации

Страница: 10 / 24

CC Skywave Page 10
Radio Operation
memory. The current settings that will be saved with your station are:
1.)
Stereo or Mono selection on FM
2.) Bandwidth selection on AM, Shortwave,
or Air bands.
4. Changing AM/FM Bands - Setting Weather Alert
Press the AM/ FM button once quickly to switch between AM and FM bands.
For NOAA Weather Alert: Press and hold this button to activate the weather alert for 4, 8, or 16 hours.
Release button to make selection. To disable alert, press and hold this button for 2 seconds. Note: When
alert is set and radio is OFF, light will flash indicating alert is on and working. Turning off when not needed will
help conserve batteries.
5. Frequency Button - Enter a Frequency Directly
When you are in your selected band, this button lets you directly enter the frequency number of your desired
station using the number buttons. For example, to play 1480 kHz in the AM band, quickly press the FREQ
button and then enter 1, 4, 8, 0 using the number buttons. Note: When manually entering SW frequencies
2300 to 2610, you must press the FREQ button after entry.
6. Changing Pages/Tone
Each memory page allows you to save 10 additional stations per band. To change to a different page, press
the PAGE button once quickly, then press any memory button 0-9 to select the Page that you desire. To
change between Music and Voice tones, press and hold this button for two seconds. Display will switch
between “Music” and “Voice”.