C. Crane CC Skywave SSB, Инструкция по эксплуатации, Страница: 7 / 32

CC Skywave SSB Page 7
DO NOT USE LITHIUM BATTERIES.
1. Position the radio face down on a soft surface to protect it.
2. Remove the battery cover by applying pressure and sliding downwards towards the bottom of the radio.
3. Insert the two (2) “AA” alkaline or NiMH cell batteries into the compartment as indicated. Be sure the
negative (-) end of the battery is against the spring.
4. Replace the battery cover. You are now ready to operate your radio.
Note: You will have 30 seconds after
batteries are removed before the clock
and alarm settings are lost. We
recommend having your new batteries
ready to insert quickly after removing the
old ones.
In our test, (going slowly) it took us about
15 seconds to add the new batteries
after removing the old ones. The memory
presets and other settings are stored
in permanent memory so they will not
be lost if the radio is unpowered for a
duration of time.
Installing the Batteries
“AA” Batteries (2)