C. Crane CC Skywave SSB, Инструкция по эксплуатации, Страница: 12 / 32

Page 12 CC Skywave SSB
Radio Operation
4. AM/FM/NOAA Weather Alert
Press the AM/FM button once quickly to switch between AM and FM bands. For NOAA Weather Alert:
Press and hold this button to activate the weather alert for 4, 8, or 16 hours. Release button to make
selection. To disable alert, press and hold this button for 2 seconds. Note: While the radio is OFF with
ALERT activated, it will continue to use the same amount of power as if the radio were fully ON. The light
will continue to flash indicating alert is ON and working. Turning the alert OFF when not needed will help
conserve batteries.
5. Frequency Button
When you are in your selected band, this button lets you directly enter the frequency number of your
desired station using the number buttons. For example, to play 1480 kHz in the AM band, quickly press
the FREQ button and then enter 1, 4, 8, O using the number buttons. Note: When manually entering SW
frequencies 2300 to 2610, you must press the FREQ button after entry.
6. Page Button/Changing Tone
Each memory page allows you to save 10 additional stations per band. To change to a different page,
press the PAGE button once quickly, then press any memory button 0-9 to select the Page that you desire.
To change between Music and Voice tones, press and hold this button for two seconds. Display will switch
between ‘Music’ and ‘Voice’.