Female connector strips
The board has 4 female connector strips with a 2.54 mm connector grid, provided for you free.
Female connector strip "POWER"
• "IOREF": Analogue voltage reference (see Atmel data sheet).
• "RES": Reset line of the ATmega328 microcontroller. Reset occurs, when it is connected to
GND.
• "3.3V": 3.3 V output for shields or external components, max. 200 mA.
• "5V": 5 V output for shields or external components, max. 200 mA.
• "GND": Common ground.
• "VIN": 5 V supply of the boards (alternative to power adapter and USB supply).
Female connector strip "ANALOG IN"
• "A0" to "A5": Analogue inputs (10bit resolution)
Female connector strip "DIGITAL"
Pins 0 to 13: Digital and multifunctional in/outputs (see Arduino reference at the website
www.arduino.cc)
JST plug (SEEED)
Using 4 pole JST connector strip ("ANALOG", "I2C", "SERIAL") various sensors of the SEEED
Company can be directly connected. But the sockets can be used with own sensors or actua
-
tors as well.
Examples of the "SEEED GROVE" sensors can be found on the website:
www.seeedstudio.com
ICSP pin strip
This pin strip is the ICSP programming interface of the ATmega328 microcontroller required
for production. SPI interface of ATmega328 is provided on these pins. It can be used for own
components equipped with SPI interface.
Disposal
The product must not be disposed of with the household waste.
Dispose of an unserviceable product in accordance with the relevant statutory regu-
lations.
Technical Data
Operating voltage .................................
7 - 12 V/DC
Power consumption ..............................max. 200 mA
Ambient conditions ...............................
Tempe5 °C to +40 °C; humidity 20% to 85%,
non-condensing
Dimensions ...........................................
75 x 53 x 15 mm (L x W x H)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status
at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
