INETVU® MOBILE SYSTEM QUICK START – HUGHES KA
C-COM Satellite Systems Inc.
Page 12
1.11 Software Setup and Initial Configuration Procedure with Hughes
9200/9260/9400/9460/9600&9800 Series Modems
1.
If you are using the network interface to communicate with the 7710 Controller, set the
PC/Notebook to the same network as the 7710 Controller.
(If you are using the USB interface,
you may skip to the Software Installation)
2.
Open
Network and Sharing Center\Network
Connections
, right-click your network card, and select
Properties
.
3.
Select
Internet Protocol Version 4 (TCP/IPv4)
and click
Properties
.
4.
Select
Use the following IP address
.
Set your PC to the same subnet as the 7710 Controller.
PC IP:
192.168.0.3
7710 IP:
192.168.0.2
Subnet Mask:
255.255.255.0 (Modem/Router
Dependent)
Gateway:
192.168.0.1 (Router/Modem IP)
Set the DNS IP Addresses if required.