C-Com HN 9200, Быстрый старт, Страница: 10 / 19

INETVU® MOBILE SYSTEM QUICK START – HUGHES KA
C-COM Satellite Systems Inc. Page 10
1.9 Initial Controller Configuration and Verification Test with Hughes
9200/9260/9400/9460/9600&9800 Modem(s)
Once the system wiring with the Hughes modem is setup and the network configuration on your PC is
configured, you are required to configure the system parameters for the following before satellite
acquisition:
€
Install iNetVu® software if not already installed, see 7700 Series Controller Manual for
installation details.
€
Communication Method between IMS and iNetVu® Controller.
€ Satellite Name, Longitude, and Transmit Polarization
€ Modem/VSAT Communication Parameters
The 7710 Controller may be configured via the Software Application / Web Interface / LCD interface.
Only one is necessary for complete configuration.
€ iNetVu® Software Application (
preferred method
)
€ First time user should use the iNetVu Wizard which is imbedded into the iNetVu software for
guidance in configuring your system.
 USB Connection
 Ethernet Connection
€ iNetVu® Web Interface
 Ethernet Connection
€ iNetVu® 7710 Front Panel
USB drivers must be installed for USB connection method. The configuration process is only required to
be done once as long there are no change in satellite, service, modem, or platform parameters.