C & K Systems S5010, Инструкция по использованию

Страница: 24 / 72

3
Arm/ Bypass
20
When your system is armed
with full arming, both the perim-
eter and interior zones are
armed. You are allowed a set
time to enter or exit the build-
ing before an alarm sounds.
See Section 8 for the entry and
exit delay settings programmed
into your system.
To Arm the System
with Full Arming:
Make sure the display reads:
READY TIME
1. Enter your user code. Exit
and secure the building.
To Arm the System with
Quick Full-Arming:
1. Press and hold the
key for 2 seconds until you
hear two beeps. Exit and se-
cure the building.
Full
Arming
Interior armed _X_
Perimeter armed _X_
Exit allowed _X_
Requires user code _X_
Automatically arms ___
No entry allowed ___
Quick Full-Arming.
If your system is pro-
grammed for quick full-
arming, you do not
need to enter a user
code.
If you are using a common-area keypad
or a common keypad to arm and disarm
your system, follow the arming instruc-
tions described in Section 7 of this
manual. (These keypads are used in
partitioned systems.)
!
NOTE