BZBGEAR BG-UHD-VW24
PRODUCT MANUAL
Screen Splicing
This option connects the selected screens into a video wall configuration.
Cancel Splicing
Return the Video Wall configuration to normal outputs.
Screen 2 –
Cancel Splicing
Remove a single screen from the unified video wall to display a separate
image. See the example below:
Video Wall display with bezel compensation and different full frame image on display 3
Input Select
Follow the sub-menu to change the input for the video wall display.
This function may also be used to change the input for the secondary
image as shown in the above example.
Output Select
This option is only available for a display that is not already assigned to
the video wall.
Output Type
This option is only available for a display that is not already assigned to
the video wall.
Output Format
This option is only available to a display that is not already assigned to
the video wall. This setting is for configuring the output resolution of the
unassigned display.
Mirror
ManualTwo sub-options: OFF (default), ON (H+V Mirror)
“ON” will rotate the selected display 180º.
Test Pattern
When enabled, the output will display a color bar pattern.
Bezel Setting
The Bezel Setting allows the images displayed on the video wall to be adjusted by
compensating for the thickness of the TV’s bezel. The displays on the video wall should
create a cohesive, unified image. To achieve this, the edge of each display’s image must be
removed from the sides of displays that meet. The bezel correction may be accomplished
using either Type A Bezel Setting, or Type B Bezel Setting.
Type A Bezel Setting:
Manually remove pixels from each display’s image edge until a cohesive image is achieved.
Enter the number of pixels that need to be removed from the edges of the displays that
meet. Click “Set” to view the effects of the change and adjust if needed.
Type B Bezel Setting:
Measure the display from top to bottom outside the bezel. Next, measure in display from
top to bottom inside the bezel. Enter both measurement values into the entry boxes, click
“Set” and the bezel will be correct for automatically.
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
14
