BZBGEAR BG-EXH-100C5
PRODUCT MANUAL
Receiver Panel
Name
Function Description
Power LED
The red LED will illuminate when the receiver is on. The LED will be off when the receiver is on
standby.
ARC LED
The green LED will illuminate when the ARC function is turned on.
SPIDIF LED
The green LED will illuminate when the SPDIF OUT port outputs the audio signal that is returned
from SPDIF IN of the receiver.
SWITCH
Press the button to switch the output audio signal source for the SPDIF OUT and L/R OUT port.
SERVICE port
Firmware update port.
DC 24V
DC 24V input for 24V 1A power adapter.
Note:
The extender supports PoC functionality. Either the transmitter or receiver must be
connected to a 24V/1A power supply. The other does not require a power supply.
HDBT IN
RJ45 port to connect to the HDBT OUT port of the transmitter using a CAT 6/6a cable.
HDMI OUT
HDMI output for a display.
IR IN
IR input port to receive the IR remote’s signal.
IR OUT
IR output port for display device control. This IR output signal is from the IR IN port of the
transmitter.
SPDIF IN
SPDIF connector for optical audio input.
RS-232
3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will
pass-through from transmitter to receiver or receiver to transmitter.
LAN
Connect to an internet access device such as a computer..
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
9
