17
6. Network Connecting
6.1 Mode of Connecting
Direct Mode: Connect camera with computer through network cable directly.
LAN Connecting Mode: Camera could connect to the Internet by router or interchanger then
users could log in through browser.
Note: Don’t put the wires and cables at somewhere easily touched by people for
fear that the quality of imaging is affected by unstable signaltransmission which
is caused by line contact problem.
There must be IP net segment for camera in the computer. It will be a phenomenon that
couldn’t log in if without net segment. For example, camera’s default IP is 192.168.1.162 then
the computer should add Network of 1.
Specific process as below: First, open [Properties] at computer’s local network, then select
“Internet Protocol Version 4(TCP/IPv4)” and double click or click its [Properties] and enter. And
then click [Advanced] to enter into Advanced TCP/IP Settings. Input IP to the [WINS server]
and click [Add] to finish. Users could change the camera IP address with relevant net segment.
Note: Don’t clash the IP with other computers or IP equipment when adding IP
address. Please make sure whether the IP you need is available or not before
adding.
Verify if the net segment works. Open [Start] on the computer and input cmd to “operation”
and click “enter” then input ping 192.168.1.245 to DOS commend window and press enter.
Then it comes up with the information as below picture that means the net segment works.
