1
1. Product Introduction
Thanks for choosing the HDMI 2.0 2x8 Splitter, which can distribute either one of two
HDMI inputs to eight outputs. The splitter supports HDMI video resolution up to
4K@60Hz 4:4:4, 1080P 3D and multichannel audio formats. Except passing EDID
information from the display, there are multiple built-in EDID settings can be selected
by the 4-pin DIP switch on the rear panel. The splitter can de-embed HDMI digital
audio to stereo analog L/R and Toslink SPDIF audio outputs to provide audio sources
for existing audio system.
CEC technology is adopted to turn on/off displays and adjust volume by the control
buttons on the front panel. Moreover, the splitter supports convenient firmware
upgrade through Micro-USB port.
1.1 Features
Supports HDMI 2.0 and video resolution up to 4K@60Hz 4:4:4.
HDMI inputs support HDCP 2.2 and the outputs support HDCP1.4.
Supports video resolution down-scaling, the 4K input can be automatically degraded
to 1080P output for compatibility with 1080P display.
18Gbps high bandwidth.
Features RCA (L/R) jack and Toslink connector for audio de-embedded.
Advanced EDID management: multiple preset and user defined allowed.
Built-in equalizer for signal enhancement to avoid signal attenuation in transmission.
Supports CEC control to turn on/off displays and adjust their volume.
Provides LEDs to indicate the current operating status and to assist troubleshooting
and installation.
Firmware upgrade by Micro-USB port.
