BZBGEAR BG-UDA-E18
PRODUCT MANUAL
Data Signal
Indicator Lamp
Connection Signal
Indicator Lamp
●
Illuminating: HDMI signal with HDCP.
●
Flashing: HDMI signal without HDCP.
●
Dark: No HDMI signal.
●
Video (OUT)
●
Illuminating: Matrix and HDBaseT
Receiver are in good connection
status.
●
Flashing: Matrix and HDBaseT
Receiver are in poor connection status.
●
Dark: Matrix and HDBaseT Receiver
are not connected.
HDBaseT Receiver Panel
No. Name
Function Description
1
Power LED
When the receiver is powered on, the power indicator will be on.
2
SERVICE port
Used for firmware update.
3
DC 24V
Plug DC 24V/1A power supply into the unit and connect the adapter to an AC outlet.
(
Note
: The HDBaseT receiver also can be powered by the transmitter via a CAT cable.)
4
HDBT IN
Connect to the HDBT OUTPUT port on the transmitter with a CAT cable.
5
HDMI OUT
HDMI output port, connect to HDMI display device such as TV or Projector with an HDMI
cable.
6
AUDIO OUT
Audio output port, connect to amplifier or speaker
7
IR IN
Connect to the IR Receiver cable. The IR signal will send to the IR OUT port of the
transmitter
8
IR OUT
Connect to the IR blaster cable, the IR signal is from IR IN port of the transmitter.
9
RS-232
3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will
pass-through from transmitter to receiver or from receiver to transmitter
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
8
