12
11
RESET
Reset System To Default Setting (Should Type "Yes" To
Confirm, "No" To Discard)
12
IR232 vv
Set IR And RS232 Connect To Remote Valens RX/TX
vv=OFF: Disconnect With Valens
vv=RRX: Remote Valens RX
vv=RTX: Remote Valens TX
vv=BOTH: Remote Valens RX and TX
13
OUT xx FR yy
Set OUTPUT:xx From INPUT:yy
xx=00: Select All OUTPUT Port
xx=[01...02]: Select One OUTPUT Port
yy=[01...04]: HDMI Input 01 ~ 04
yy=HDBT: HDBT/Valens Input
yy=AV: AV Input( Output 02 Only )
yy=YPBPR: Component Input( Output 02 Only )
yy=VGA1...VGA4: VGA Input( Output 02 Only )
14
OUT BYP ON/OFF
Set HDMI Input Signal Through Scaler or Bypass
15
OUT SP/MX
Set OUTPUT To Splitter or Matrix Mode
16
OUT RES rr
Set Scaler Output Resolution (Change Output Resolution Will
Effect EDID Setting)
rr=01: 1080P@50Hz
rr=02: 1080P@60Hz
rr=03: 720P@50Hz
rr=04: 720P@60Hz
rr=05: 1280x1024@60Hz
rr=06: 1024x768@60Hz
rr=07: 1360x768@60Hz
rr=08: 1440x900@60Hz
rr=09: 1680x1050@60Hz
17
OUT FREQ mm
Set Output Frequence Mode (When Output Resolution is
1080P or 720P)
mm=AUTO: Set Output Freq Auto Change To Input Freq
mm=FORCE: Set Output Freq By CMD:OUT RES rr Select
18
AUD SCA ORG
Scaler Audio Input Follow Port Selection
19
AUD SCA ANA
Scaler Audio Input From Analog L/R Signal
20
AUD HDMI yy ORG
HDMI Input:yy Use Orginal HDMI/DVI Signal
Signal yy=[01...04]: HDMI Input 01 ~ 04
21
AUD HDMI yy ANA
HDMI Input:yy Embeded Analog L/R
Signal yy=[01...04]: HDMI Input 01 ~ 04
22
AUD HDMI yy AUTO
HDMI Input:yy Embeded Analog L/R When Input is DVI signal
Signal yy=[01...04]: HDMI Input 01 ~ 04