CE WARNING
This equipment generates and uses radio frequency energy and if not installed and used properly,
that is, in strict accordance with the manufacture's instructions, may cause interference to radio
and television reception. It has been tested and found to comply CE I-ETS 300 440, which are
designed to provide reasonable protection against such interference in a residential installation.
See Trouble shooting for help in solving interference
FCC/CE NOTICE
The user is cautioned that changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
A receiver cannot respond to more than one transmitted signal at a time and may be blocked by
radio signals that occur on or near their operating frequencies. Changes or modifications to the
device may void CE compliance. Infrequently used radio links should be tested regularly to protect
against undetected interference or fault.
p4.
p9.
Trouble Shooting:
Error
Possible cause
No image and
no chime tone
ï Outdoor unit or indoor unit is not supplied with electricity or the batteries
power low.
ï Make sure the power pack is plugged in correctly.
ï The distance between the outdoor unit and indoor unit is too large.
ï Signal been block by metal gate or brick wall, please change other place
to install the outdoor unit.
ï Outdoor unit and indoor unit are in different channels.
The image/sound
is distorted
ï The range of the system was exceeded. Reduce the distance.
ï There is a strong interference source (e.g. WiFi, bluetooth, microwave oven,
etc.) nearby.
Flickering/running
image
ï Strong spotlight in the cover range of the camera.
Normal sound,
imageis too light
or dark.
ï The monitoring range of the outdoor unit is not lit properly.
ï Indoor unit is adjusted wrongly (readjust brightness in OSD function).
ï Strong spotlight in the cover range of the outdoor unit.
Contact Details
CH Byron
Byron House
Sherwood Rd Aston Fields Bromsgrove B60 3DR UK
Tel: 0845 230 1231
E:[email protected]
W: www.chbyron.com
