byox JT2017.01, Инструкция по эксплуатации

Страница: 14 / 15

14
PARTS OF THE TRICYCLE – FIGURE 1 __
1. Canopy; 2. Handlebar; 3. Handlebar tube; 4. Cap of the steering mechanism; 5. Free ratchet ring; 6. Ball
bearings; 7. Fork; 8. Pedals; 9. Foldable footrest; 10. Frame; 11. Parental control handle; 12. Backrest; 13 Safety
board; 14. Seat; 15. Rear footrest; 16. Rear wheels; 17. Luggage basket.
ASSEMBLY INSTRUCTIONS
__
1. Installation of the front fork – FIGURE 2
Place the mudguard on the fork (7); beforehand remove the screw, which is located at the upper part of the
fork tube. Afterwards place the upper part of the fork in the front part of the frame (10).
2. Installation of the handlebar – FIGURE 3
Place the handlebar tube (3) on the fork (7), lifting the cap of the steering mechanism (4). The openings for the
screw must be aligned. Insert the screw through the openings and fasten with the nut, using the appropriate
tools to fix it (the tools are not included in the set). Put the cap on top.
3. Installation of the rear wheels – FIGURE 4
Place the rear wheel axle (16) directly in the plastic opening of the frame.
4. Installation of the seat – FIGURE 5
Place the seat (14) on the frame (10); the openings for the screws must be aligned. Place the screws and
tighten.
5. Safety board – FIGURE 6
Lift up the pin of the board (13) and place the side mechanism in the groove of the seat (14). Repeat on the
other side. Insert one half of the board through the fabric opening and connect the two parts. You must hear a
click.
6. Installation of the parental control handle – FIGURE 7
Release the safety lever of the parental control handle (11). Place the tube of the handle in the base. The spring
pin must pop out entirely and you must hear clicking sound. Close the safety lever.
8. Toy basket
It is placed under the rear footrest; fasten with screws to the frame.
9. Canopy – FIGURE 8
Place both tubes of the canopy in the base tubes, located on top of the safety board. The spring pins must pop
out entirely and you must hear clicking.
FUNCTIONS OF THE PRODUCT __
Look pictures f1-f5
1. Blocking of the pedals aka free wheel – Picture f1
In order to block the free movement of the pedals - turn the button which is located on the rim. This way the
pedals will move freely from the wheel. Using this function, if you unblock the free wheel, your child can move
the pedals without influencing the movement of the front wheel.
2. Seat – Picture f2 - In order to move the seat forwards or backwards pull the button, which is located under
it, outward and adjust. In order to turn the seat so that the child is facing towards or away from the parents.
press the button, which is located at the lower side of the seat above the lever for forward/backward
adjustment.
3. Backrest – Picture f3 – The backrest can be adjusted to several positions through the side buttons, which
must be pressed simultaneously.
4.Footrest – Picture f4 – Press the button, which is located in the middle of the rack axle, and fold the
footrests.
5. MP3 player function – Picture f5
PLACING OF THE BATTERIES _