8 |
EN
Assembly Instructions
The backpack harness should be attached to the device prior to use.
To adjust the backpack upper harness:
1. Adjust the upper harness by loosening the tensioning straps.
Then using a Phillips screwdriver, thread the screw into one
of the three adjustable upper harness locations. The upper
pad should be secured once the screw is
fi
rmly tightened
into position.
Note: The upper part of the harness should sit between the
shoulder blades for proper
fi
t. Taller users may need to move
the position up. Shorter users may need to move the position
down. DO NOT use any additionally assembly compounds
such as Loctite™ or grease.
2. To attach the lower part of the harness, use a Philips
screwdriver to thread the lower attachment bolts into the lower
back plate.
NOTE: DO NOT use any additional assembly compounds such
as Loctite™ or grease.
OPERATING INSTRUCTIONS
Harness Assembly
1
2
3
4
5
6
7
8
9
1
Upper Harness
Breathable padded back support for
ventilation and comfort.
2
Upper Attachment
Bolt
Secures upper harness to backpack
unit. Can be adjusted to
fi
t the
operator.
3
Wand Attachment
Clip
Clip for temporary spray wand
storage.
4
Sternum
Strap/Buckle
Strap to ensure even weight
distribution.
5
Waist
Strap/Buckle
Strap to ensure even weight
distribution.
6
Shoulder
Straps
Breathable padded mesh shoulder
straps.
7
Tensioning
Straps
Used to lengthen or shorten the
backpack shoulder straps.
8
Lower Attachment
Bolts (2)
Secures lower back plate to
backpack.
9
Lower Back Plate
Breathable padded lower back
support for ventilation and comfort.
