Page 13
IBEX
,
IBEX+
,
ZEST
,
ZEST+
Battery on/off switch
Within the
IBEX
and
ZEST
ranges, on the battery itself there is a simple on/off rocker switch.
The lock on the battery is for removal of the battery from the bike for charging.
TORNADO
The
TORNADO
LCD controls the on/off of the bike. The lock on the bottom of the bike is for
battery removal only.
CHARGING
Your new Byocycles Electric bike comes with a charger similar to the one pictured below.
Charge The Battery
A. Before using your ByoCycle, we advise that you charge the battery fully. This is done by
firstly connecting the supplied charger to the battery then connecting the charger to the
mains socket. By connecting the charger in this sequence it minimizes the chance of
short circuiting the system.
B. Turn the plug on and observe the light on the charger, this should be red in colour
C. Once the light goes green it means the battery is fully charged and you’re good to go!
(charging may take upto 3 hours).
• The charging port for the
TORNADO
is located on the bottom of the bike.
• The charging port for the
ZEST
is located on the left hand side, near the crank.
• The charging port for the
ZEST+
,
IBEX+
,
IBEX
,
CHAMELEON FD
,
FDXL
,
CITY SPEED
and
BOXER
are all located on the battery.
Battery Information
WARNING!
If you are not planning on using your battery for an extended period of time, fully
charge the battery before putting it into storage, we recommend you give the battery a top up
charge every 4 weeks during this time to prevent any of the cells breaking down.