background image

 

Lazy Sprocket Kit Instructions 

 

 

Warranty: 

BYOC, Inc. guarantees that your kit will be complete and that all parts and components 
will arrive as described, functioning and free of defect.  Soldering, clipping, cutting, 
stripping, or using any of the components in any way voids this guarantee.  BYOC, INC 
guarantees that the instructions for your kit will be free of  any majors errors that would  
cause you to permanently  damage any components in your kit, but does  not guarantee 
that  the instructions will be free of typos or minor errors.   BYOC, INC does not 
warranty the completed pedal as a whole functioning unit, nor do we warranty any of the 
individual parts once they have been used. If you have a component that is used, but feel 
it was defective prior to you using it, we reserve the right to determine whether or not the 
component was faulty upon arrival.  Please direct all warranty issues to: 
[email protected] This would include any missing parts issues. 

 
Return: 

BYOC, Inc. accepts returns and exchanges on all products for any reason, as long as they 
are unused.  We do not accept partial kit returns.  Returns and exchanges are for the full 
purchase price less the cost of shipping and/or any promotional pricing.  Return shipping 
is the customer’s responsibility.  This responsibility not only includes the cost of 
shipping, but accountability of deliver as well.  Please contact 
[email protected] to receive a return authorization before mailing. 

 

Содержание Lazy Sprocket

























Отзывы: